Product description Lead Seals

Sealing with lead seals is the most traditional way of sealing. The lead seals can be used in combination with the sealing pliers NZT-1P and seal-wire. Squeezing this relatively soft metal around the twisted seal wire takes little force. The sealing lead is available in two sizes: the most commonly used 8 mm and the larger variant of 10 mm. These leads are suitable for sealing meters and barrels. A bag of 8 mm leads contains approximately 525 pieces (1 kg). A bag with 10 mm seals contains approximately 350 pieces (1 kg).

Traditional sealing method; available in 8 mm and 10 mm

Sealing with real lead seals is one of the most traditional sealing methods. The seals are made of lead for extremely reliable operation. The material is easy to press down to sealing wire with sealing pliers. Lead is relatively soft, flexible, and malleable compared to other metals. A more environmentally friendly alternative to lead seals is the plastic seal leads in various eye-catchin  colours.

The lead seals are available in two diameters, namely 8 mm and 10 mm. On a 10 mm lead seal, there is more space for a possible embossing.

To be used in combination with sealing wire and sealing pliers

The way of sealing in a combination with plastic seals and seal wire is very simple and flexible in use. To complete the sealing, a sealingwire is also needed. The ends of the seal wire are pushed through the lead seal. The ends of the wire are wrapped around each other to create extra grip. Finally, the seal is pinched shut with a suitable sealing plier. Once the lead has been squeezed shut, the withdrawal of the seal wire is no longer possible.

Packed per bag of 1 kg (350 pcs. 10 mm / 525 pcs. 8 mm)

The lead seals from Navacqs are packed in a bag of approximately 1 kg. The weight of an 8 mm and 10 mm lead seal differs from each other. As a result, a bag of 8 mm leads contains approximately 525 pieces. A bag with 10 mm seals contains approximately 350 pieces.

Suitable for meters, barrels, ATM cassettes

Sealing with lead seals is a reliable way of sealing. The material is resistant to moisture and is therefore suitable for sealing gas meters, electricity meters, and water meters, for example. However, the seal may only be installed by a certified installer in consultation with the network operator. As a private individual, it is prohibited to replace seals in the meter cupboard without the permission of the network operator!

As an alternative to seal wire, pliers, and lead, use can be made of the Twist Seal. No sealing pliers are required for sealing with the Twist Seal. Another difference is that each Twist Seal has a unique number. This makes fraud even more difficult.