The Roll Tin Sealing Plier NZT-2 can be used in combination with tinplate seals. It is a reliable sealing method that has been used for many years. By squeezing the tongs, a tinplate seal rolls around the seal wire. A seal consisting of roll tin seals and sealing wire is a reliable way of sealing. For example gas meters, electricity meters and water meters can be safely sealed. It is also possible to engrave the stamp of sealing pliers. This makes the Roll Tin Sealing Plier NZT-2 extra unique.

Sealing in combination with Roll Tin Seals

To seal roll tin seals special sealing pliers are required. The Roll Tin Sealing Plier NZT-2 has been specially developed to close (seal) the roll tin seals. Thanks to the reliable design of the Roll Tin Sealing Plier NZT-2, thousands of roll tin seals can be sealed. An investment for the long term. This makes sealing with roll tin seals not only safe but also cost-effective!

Has been used for years in Belgium and the Netherlands

For many decades, sealing with roll tin seals has been used. Sealing has proven itself over the years as a very reliable sealing method. To properly seal, the sealingwire must be placed in the roll can seal. For extra security, the two ends of the seal wire should be rotated. Twisting the wire provides extra grip on the seal.

In Belgium in particular, sealing with roll tin seals is common. The sealing method consists of a roll tin seal in combination with a piece of sealingwire . Sealing with tinplate seals and tinplate seals is one of the most traditional methods of sealing.

Suitable for sealing meters and technical installations

A seal consisting of tinplate seals and sealing wire is a reliable way of sealing. For example gas meters, electricity meters and water meters can be safely sealed. However, the seal may only be installed by a certified installer in consultation with the network operator. As a private individual, it is prohibited to replace seals in the meter cupboard without the permission of the network operator!

In addition, technical equipment and various technical meters can also be sealed with the roll tin seals. The thin steel wire easily fits through tight, tight openings. The wire can be cut to any desired length, so even a few meters of wire are possible.

Optionally available with engraved stamp

The stamp in the Roll Tin Sealing Pliers NZT-2 can be engraved with text as well as with a logo. The engraving is pressed into the tin can seal during sealing. This creates a unique seal. As standard, the tinplate stamps are only provided with a unique ascending numbering. Please contact us via +31 (0) 10-495 0000 or sales@navacqs.com to discuss the possibilities.