The Label Lock Low Residu does not leave a layer of residu on the surface. When removed, a text appears in the security label. Therefore manipulation is immediately visible. The Label Lock Security Labels are designed and produced according to the strict ISO 9001: 2015 standards. Thanks to their unique features, the Security Labels are suitable for surfaces made of powder-coated metal and glass. Varnished wood is also suitable as a substrate. The labels can withstand temperatures from -30 degrees to +70 degrees Celsius. As standard the labels are printed with the text “SEALED” in combination with a unique ascending numbering. It is also possible to provide the security labels with your own name imprint.

Top quality labels; production according to ISO 9001: 2015

The Label Lock Security Labels are the best security labels available. The labels are designed and manufactured in England with the most reliable materials. Both the production facility and the design department are ISO accredited. This accreditation has been carried out by an independent UK organization called UKAS.

They are designed and produced according to the strict ISO 9001: 2015 standards. All steps in the production process are carried out according to strict protocols. The end product is also extensively checked. The labels are only delivered after strict quality checks. Therefore the Label Lock Security Labels are one of the most secure labels available.

High temperature range

The use of high-quality materials and the thoughtful design make it possible to use the labels in a wide temperature range. The labels can withstand freezing temperatures of up to -30 degrees Celsius. The Label Lock labels also retain their effect at high temperatures. Temperatures up to +70 degrees Celsius have no effect on the operation. The Label Lock labels remain a reliable protection to ensure safety.

Leaves hardly any adhesive residue on the surface

The Label Lock Low Residue has been developed to prevent manipulation and fraud. The labels consist of two layers that are connected with a specially developed acrylic adhesive. The security labels must be stuck on a clean and grease-free surface. After some time (15-20 minutes), removal without traces is no longer possible.

When removed, the two layers separate from each other. The message “OPENED” appears clearly visible in the sticker. Once the two layers have been separated from each other, it is no longer possible to stick them back. The message “OPENED” remains visible. This makes fraud impossible.

The Label Lock Low Residue leaves hardly any adhesive residue on the surface after removal. There are also security labels that do leave an indelible layer on the surface. The Label Lock High Residue is an example of this.

Suitable for metal, lacquered wood and glass

The Label Lock Low Residue Security Labels are suitable for specific surfaces. The labels only work correctly on the correct surface. They are suitable for surfaces made of powder-coated metal and glass. The labels are also suitable for surfaces of lacquered wood. It is important that the surface is smooth, as the adhesive cannot work properly with raw wood.

It is always advisable to first test a label on the surface for its effectiveness. The label must be stuck for a certain period of time for optimal operation.

Sealing doors, electronic devices and first aid kits

Thanks to the unique product features, the Label Lock Low Residue Labels are suitable for sealing a door of a sealed building. The sticker is suitable for both interior and exterior doors. The labels are resistant to moisture and rain for up to 24 hours. The door must have a lacquer or another type of smooth finish.

Another common application is the sealing of electronic equipment. For example, a computer can be sealed to prevent the housing from being unscrewed. In addition, lenses of telephones or tablets can be sealed with the security labels, so that no photos can be taken of rooms that contain sensitive information.

Finally, first aid kits can also be sealed with the Label Lock Labels. The seal indicates that the first aid kit is complete. In emergency situations, the sticker can be easily removed.

Provided with one-off unique imprint and ascending numbering

The Label Lock Security Labels have a unique print. As standard, the labels are printed with the text “SEALED” in combination with a unique ascending numbering. The control of the imprint is closely monitored and maintained by the manufacturer. These checks and working methods are part of the ISO certification. Since every seal is unique, it can help to prevent or detect fraud and manipulation.

3 different formats

3 sizes are available from stock in the color blue for the Label Lock Low Residue. “Small” is the smallest variant available. This security label has a size of 73 mm x 20 mm (L x W). The largest variant is the “Large” with a size of 148 mm x 45 mm. Between these two dimensions is the “Medium” version. These security labels have a size of 98 mm x 30 mm.
Next to the stock product, it is possible to print the Label Lock labels with your own imprint. For example in the form of your own company name or logo. Other sizes and colors are also possible. Please contact us via +31 (0) 10-495 0000 or sales@navacqs.com to discuss the possibilities.